2010 Peugeot 408 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x108 on every 2010 trim.

Tires for the 2010 Peugeot 408

Sizes most trims come with first. Open your trim below for its exact size.

  1. 215/55R16 Best-rated standard on 1 trim · optional on 1
  2. 195/65R15 Best-rated standard on 1 trim
  3. 215/50R17 Best-rated optional on 2 trims

Also listed: 205/55R16 225/45R17 235/40R18

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2010
2
Generation
I (T7)

2 trims sold in 2010

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Peugeot 408 I (T7)

2010–2017 2 trims
408 1.6i 110 hp · TU5JP4 I4 195/65R15 91H 4 fitments
Generation
T7 · 2010–2017
Power
110 hp
Engine
TU5JP4 I4, Petrol
Center bore
65.1 mm
Bolt pattern
4x108
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
195/65R15 91HRim 15x6.5 ET27 4x10833 psi
205/55R16 91VRim 16x7 ET32 4x10833 psi
215/55R16 93VRim 16x7 ET32 4x10833 psi
215/50R17 92VRim 17x7.5 ET32 4x10833 psi

How to read 91H: 91 is the load index (up to 1,356 lb / 615 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET27 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

408 2.0i 148 hp · I4 215/55R16 93V 4 fitments
Generation
T7 · 2010–2017
Power
148 hp
Engine
I4, Petrol
Center bore
65.1 mm
Bolt pattern
4x108
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
215/55R16 93VRim 16x7 ET32 4x10833 psi
215/50R17 92VRim 17x7.5 ET32 4x10833 psi
225/45R17 92VRim 17x7.5 ET32 4x10833 psi
235/40R18 91WRim 18x8 ET32 4x10836 psi

How to read 93V: 93 is the load index (up to 1,433 lb / 650 kg per tire) and V the speed rating (up to 149 mph / 240 km/h). ET32 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 2010
2
Generation
I (T7)
Other years
All years (2010–2026)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator