1983 Peugeot 505 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x140 on every 1983 trim.

Tires for the 1983 Peugeot 505

Sizes most trims come with first. Open your trim below for its exact size.

  1. 190/65R15 Best-rated standard on 1 trim · optional on 2
  2. 175xR14 standard on 1 trim
  3. 175xR15 standard on 1 trim

Also listed: 205/55R16

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1983
3
Generation
I

3 trims sold in 1983

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Peugeot 505 I

1979–1992 3 trims
505 1.8 79 hp · I4 175x R15 88S 2 fitments
Generation
I · 1979–1992
Power
79 hp
Engine
I4, Petrol
Center bore
63.5 mm
Bolt pattern
4x140
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
175x R15 88SRim 15x5.5 ET25 4x14028 psi
190/65R15 89HRim 15x6 ET19 4x14030 psi

How to read 88S: 88 is the load index (up to 1,235 lb / 560 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET25 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

505 2.0 109 hp · I4 175x R14 88S 2 fitments
Generation
I · 1979–1992
Power
109 hp
Engine
I4, Petrol
Center bore
63.5 mm
Bolt pattern
4x140
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
175x R14 88SRim 14x5.5 ET25 4x14028 psi
190/65R15 89HRim 15x6 ET19 4x14030 psi

How to read 88S: 88 is the load index (up to 1,235 lb / 560 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET25 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

505 2.5TD 109 hp · I4 · Diesel 190/65R15 91V 2 fitments
Generation
I · 1979–1992
Power
109 hp
Engine
I4, Diesel
Center bore
63.5 mm
Bolt pattern
4x140
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
190/65R15 91VRim 15x6 ET19 4x14030 psi
205/55R16 92VRim 16x6.5 ET15 4x14033 psi

How to read 91V: 91 is the load index (up to 1,356 lb / 615 kg per tire) and V the speed rating (up to 149 mph / 240 km/h). ET19 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 1983
3
Generation
I
Other years
All years (1979–1992)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator