2014 Proton Persona tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x114.3 on every 2014 trim.

Tires for the 2014 Proton Persona

Sizes most trims come with first. Open your trim below for its exact size.

  1. 195/60R15 Best-rated standard on 1 trim
  2. 195/55R15 Best-rated optional on 1 trim
  3. 205/55R15 Best-rated optional on 1 trim

Also listed: 205/50R16 205/45R17 215/45R17

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2014
1
Generation
II (CM)

1 trim sold in 2014

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Proton Persona II (CM)

2004–2016 1 trim
Persona 1.6i 110 hp · 1.6L CamPro S4PH I4 195/60R15 88T 6 fitments
Generation
CM · 2004–2016
Power
110 hp
Engine
1.6L CamPro S4PH I4, Petrol
Center bore
67.1 mm
Bolt pattern
4x114.3
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
195/60R15 88TRim 15x6 ET40 4x114.330 psi
195/55R15 86HRim 15x6.5 ET46 4x114.330 psi
205/55R15 88VRim 15x6.5 ET45 4x114.330 psi
205/50R16 86VRim 16x6.5 ET45 4x114.330 psi
205/45R17 85VRim 17x6.5 ET45 4x114.330 psi
215/45R17 87VRim 17x7 ET45 4x114.330 psi

How to read 88T: 88 is the load index (up to 1,235 lb / 560 kg per tire) and T the speed rating (up to 118 mph / 190 km/h). ET40 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 2014
1
Generation
II (CM)
Other years
All years (1993–2026)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator