1994 Rover 200 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 1994 trim.

Tires for the 1994 Rover 200

Sizes most trims come with first. Open your trim below for its exact size.

185/70R14 Best-rated standard on 5 trims

Check price on Amazon · 185/70R14
175/65R14 Best-rated optional on 5 trims

Check price on Amazon · 175/65R14
175/70R14 Best-rated optional on 5 trims

Check price on Amazon · 175/70R14

Also listed: 185/60R14 185/55R15 195/55R15

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1994: 5
Generation: II (XW)
Other years: 1990
1991
1992
1993
1994
1995
1996
1997
All years (1985–2000)

5 trims sold in 1994

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Rover 200 II (XW)

1989–1999 5 trims

200 214 Si/GSi +4 variants 89 hp · I4 185/70R14 88H 8 fitments

Same tires and wheels on: 216 GSi, 216 GTi, 218 TD, 220 Turbo

Generation: XW · 1989–1999
Power: 89 hp
Engine: I4, Petrol
Center bore: 56.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.5

Check price on Amazon · 185/70R14 Wheels 14x5.5 ET45 · 4x100 · 56.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
185/70R14 88H	Rim 14x5.5 ET45 ~~4x100~~	30 psi
175/65R14 82H	Rim 14x5 ET45 ~~4x100~~	30 psi
175/70R14 84T	Rim 14x5 ET45 ~~4x100~~	30 psi
185/60R14 82H	Rim 14x5.5 ET45 ~~4x100~~	30 psi
185/60R14 82H	Rim 14x6 ET45 ~~4x100~~	30 psi
185/55R15 82V	Rim 15x5.5 ET45 ~~4x100~~	32 psi
185/55R15 82V	Rim 15x6 ET45 ~~4x100~~	32 psi
195/55R15 85H	Rim 15x6 ET45 ~~4x100~~	32 psi

How to read 88H: 88 is the load index (up to 1,235 lb / 560 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.