1997 Rover 600 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x114.3 on every 1997 trim.

Tires for the 1997 Rover 600

Sizes most trims come with first. Open your trim below for its exact size.

185/65R15 Best-rated standard on 5 trims

Check price on Amazon · 185/65R15
185/70R14 Best-rated optional on 5 trims

Check price on Amazon · 185/70R14
195/60R15 Best-rated optional on 5 trims

Check price on Amazon · 195/60R15

Also listed: 195/65R15 205/50R16 205/55R16

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1997: 5
Generation: 600
Other years: 1993
1994
1995
1996
1997
1998
1999
All years (1993–1999)

5 trims sold in 1997

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Rover 600 600

1993–1999 5 trims

600 618 i/Si +4 variants 114 hp · I4 185/65R15 88H 6 fitments

Same tires and wheels on: 620 SDi, 620 Si, 620 Ti Vitesse, 623 Si

Generation: 600 · 1993–1999
Power: 114 hp
Engine: I4, Petrol
Center bore: 64.1 mm
Bolt pattern: 4x114.3
Thread: M12 x 1.5

Check price on Amazon · 185/65R15 Wheels 15x5.5 ET50 · 4x114.3 · 64.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
185/65R15 88H	Rim 15x5.5 ET50 ~~4x114.3~~	30 psi
185/70R14 88H	Rim 14x5 ET50 ~~4x114.3~~	32 psi
195/60R15 87V	Rim 15x5.5 ET50 ~~4x114.3~~	33 psi
195/65R15 91H	Rim 15x5.5 ET50 ~~4x114.3~~	32 psi
205/50R16 87Z	Rim 16x6.5 ET50 ~~4x114.3~~	35 psi
205/55R16 89Z	Rim 16x6.5 ET50 ~~4x114.3~~	35 psi

How to read 88H: 88 is the load index (up to 1,235 lb / 560 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET50 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.