2003 Rover 75 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x100 on every 2003 trim.

Tires for the 2003 Rover 75

Sizes most trims come with first. Open your trim below for its exact size.

195/65R15 Best-rated standard on 6 trims

Check price on Amazon · 195/65R15
205/60R15 Best-rated optional on 6 trims

Check price on Amazon · 205/60R15
215/55R16 Best-rated optional on 6 trims

Check price on Amazon · 215/55R16

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2003: 6
Generation: 75
Other years: 1999
2000
2001
2002
2003
2004
2005
All years (1999–2005)

6 trims sold in 2003

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Rover 75 75

1999–2003 6 trims

75 1.8 Turbo +5 variants 148 hp · I4 195/65R15 91V 4 fitments

Same tires and wheels on: 1.8i, 2.0 CDT, 2.0 CDTi, 2.0i, 2.5i

Generation: 75 · 1999–2003
Power: 148 hp
Engine: I4, Petrol
Center bore: 56.1 mm
Bolt pattern: 5x100
Thread: M14 x 1.5

Check price on Amazon · 195/65R15 Wheels 15x6 ET50 · 5x100 · 56.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
195/65R15 91V	Rim 15x6 ET50 ~~5x100~~	33 psi
205/60R15 94V	Rim 15x6 ET50 ~~5x100~~	32 psi
215/55R16 93V	Rim 16x6.5 ET50 ~~5x100~~	35 psi
225/45R17 94W	Rim 17x7 ET50 ~~5x100~~	32 psi

How to read 91V: 91 is the load index (up to 1,356 lb / 615 kg per tire) and V the speed rating (up to 149 mph / 240 km/h). ET50 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.