1994 Rover 800 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x114.3 on every 1994 trim.

Tires for the 1994 Rover 800

Sizes most trims come with first. Open your trim below for its exact size.

195/65R15 Best-rated standard on 5 trims

Check price on Amazon · 195/65R15
195/70R14 Best-rated optional on 5 trims

Check price on Amazon · 195/70R14
205/60R15 Best-rated optional on 5 trims

Check price on Amazon · 205/60R15

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1994: 5
Generation
Other years: 1990
1991
1992
1993
1994
1995
1996
1997
All years (1986–1999)

5 trims sold in 1994

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Rover 800

1992–1999 5 trims

800 820 i/Si +4 variants 134 hp · I4 195/65R15 91V 7 fitments

Same tires and wheels on: 820 Sport, 820 Turbo, 825 D/DS, 827 Si

Generation: Facelift · 1992–1999
Power: 134 hp
Engine: I4, Petrol
Center bore: 64.1 mm
Bolt pattern: 4x114.3
Thread: M12 x 1.5

Check price on Amazon · 195/65R15 Wheels 15x5.5 ET50 · 4x114.3 · 64.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
195/65R15 91V	Rim 15x5.5 ET50 ~~4x114.3~~	29 psi
195/70R14 91V	Rim 14x5.5 ET50 ~~4x114.3~~	26 psi
195/65R15 91V	Rim 15x6 ET50 ~~4x114.3~~	29 psi
205/60R15 91V	Rim 15x6 ET50 ~~4x114.3~~	29 psi
205/55R16 89V	Rim 16x6 ET50 ~~4x114.3~~	32 psi
205/55R16 89V	Rim 16x6.5 ET50 ~~4x114.3~~	32 psi
215/45R17 87Z	Rim 17x7.5 ET50 ~~4x114.3~~	33 psi

How to read 91V: 91 is the load index (up to 1,356 lb / 615 kg per tire) and V the speed rating (up to 149 mph / 240 km/h). ET50 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.