2009 Suzuki Escudo tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2009 trim.

Tires for the 2009 Suzuki Escudo

Sizes most trims come with first. Open your trim below for its exact size.

  1. 225/60R18 Best-rated standard on 1 trim · optional on 1
  2. 225/65R17 Best-rated standard on 1 trim
  3. 245/55R18 Best-rated optional on 2 trims

Also listed: 245/50R19

TireWheelGuide may earn a commission from purchases made through these links.

2 trims sold in 2009

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Suzuki Escudo III (TDA, TDB, TA7, TD5)

2008–2015 2 trims
Escudo 2.4i (CBA-TDA4W) 164 hp · 2.4L J24B I4 225/65R17 101H 3 fitments
Generation
TDA/TDB · 2008–2015
Power
164 hp
Engine
2.4L J24B I4, Petrol
Center bore
60.1 mm
Bolt pattern
5x114.3
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
225/65R17 101HRim 17x6.5 ET45 5x114.332 psi
225/60R18 100HRim 18x6.5 ET45 5x114.332 psi
245/55R18 99VRim 18x7 ET45 5x114.335 psi

How to read 101H: 101 is the load index (up to 1,819 lb / 825 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Escudo 3.2i (CBA-TDB4W) 221 hp · 3.2L N32A V6 225/60R18 100H 3 fitments
Generation
TDA/TDB · 2008–2015
Power
221 hp
Engine
3.2L N32A V6, Petrol
Center bore
60.1 mm
Bolt pattern
5x114.3
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
225/60R18 100HRim 18x6.5 ET45 5x114.332 psi
245/55R18 99HRim 18x7 ET45 5x114.332 psi
245/50R19 97VRim 19x7.5 ET42 5x114.335 psi

How to read 100H: 100 is the load index (up to 1,764 lb / 800 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 2009
2
Generation
III (TDA, TDB, TA7, TD5)
Other years
All years (1988–2023)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator