1998 Toyota Corolla Ceres tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 1998 trim.

Tires for the 1998 Toyota Corolla Ceres

Sizes most trims come with first. Open your trim below for its exact size.

  1. 175/70R13 Best-rated standard on 1 trim
  2. 175/65R14 Best-rated standard on 1 trim
  3. 185/60R14 Best-rated standard on 1 trim

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1998
3
Generation
E100

3 trims sold in 1998

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Toyota Corolla Ceres E100

1992–1999 3 trims
Corolla Ceres 1.5i (AE100) 99 hp · I4 175/70R13 82S 1 fitment
Generation
E100 · 1992–1999
Power
99 hp
Engine
I4, Petrol
Center bore
54.1 mm
Bolt pattern
4x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
175/70R13 82SRim 13x5 ET39 4x100–

How to read 82S: 82 is the load index (up to 1,047 lb / 475 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET39 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Corolla Ceres 1.6 VVT-i (AE101) 162 hp · I4 185/60R14 82H 1 fitment
Generation
E100 · 1992–1999
Power
162 hp
Engine
I4, Petrol
Center bore
54.1 mm
Bolt pattern
4x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
185/60R14 82HRim 14x5.5 ET45 4x100–

How to read 82H: 82 is the load index (up to 1,047 lb / 475 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

Corolla Ceres 1.6i (AE101) 109 hp · I4 175/65R14 82S 1 fitment
Generation
E100 · 1992–1999
Power
109 hp
Engine
I4, Petrol
Center bore
54.1 mm
Bolt pattern
4x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
175/65R14 82SRim 14x5.5 ET45 4x100–

How to read 82S: 82 is the load index (up to 1,047 lb / 475 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 1998
3
Generation
E100
Other years
All years (1992–1999)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator