1995 Toyota Corona SF tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x100 on every 1995 trim.

Tires for the 1995 Toyota Corona SF

Sizes most trims come with first. Open your trim below for its exact size.

185/65R14 Best-rated standard on 1 trim · optional on 1

Check price on Amazon · 185/65R14
175/70R14 Best-rated standard on 1 trim

Check price on Amazon · 175/70R14

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1995: 2
Generation: T190
Other years: 1989
1990
1991
1992
1993
1994
1995
1996
All years (1989–1996)

2 trims sold in 1995

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Toyota Corona SF T190

1992–1996 2 trims

Corona SF 1.8i (ST190) 123 hp · I4 175/70R14 84S 2 fitments

Generation: T190 · 1992–1996
Power: 123 hp
Engine: I4, Petrol
Center bore: 54.1 mm
Bolt pattern: 5x100
Thread: M12 x 1.5

Check price on Amazon · 175/70R14 Wheels 14x5.5 ET45 · 5x100 · 54.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
175/70R14 84S	Rim 14x5.5 ET45 5x100	–
185/65R14 85S	Rim 14x6 ET45 5x100	–

How to read 84S: 84 is the load index (up to 1,102 lb / 500 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Corona SF 2.0i (ST191) 138 hp · I4 185/65R14 85S 1 fitment

Generation: T190 · 1992–1996
Power: 138 hp
Engine: I4, Petrol
Center bore: 54.1 mm
Bolt pattern: 5x100
Thread: M12 x 1.5

Check price on Amazon · 185/65R14 Wheels 14x6 ET45 · 5x100 · 54.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
185/65R14 85S	Rim 14x6 ET45 5x100	–

How to read 85S: 85 is the load index (up to 1,135 lb / 515 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.