1991 Toyota Corona tire and wheel sizes, bolt pattern and tire pressure

Bolt patterns 4x100 or 5x100, depending on the market version.

Tires for the 1991 Toyota Corona

Sizes most trims come with first. Open your trim below for its exact size.

  1. 165xR13 standard on 3 trims
  2. 185/65R14 Best-rated standard on 2 trims
  3. 195/60R14 Best-rated standard on 1 trim

Also listed: 185/70R13

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1991
6
Generation
IX (T170)

6 trims sold in 1991

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Toyota Corona IX (T170)

1987–1992 6 trims
Corona 1.5 (AT170) 84 hp · I4 165x SR13 1 fitment
Generation
T170 · 1987–1992
Power
84 hp
Engine
I4, Petrol
Center bore
54.1 mm
Bolt pattern
4x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
165x SR13Rim 13x5 ET39 4x100–
Corona 1.6i (AT175) +1 variant 99 hp · I4 185/65R14 85S 1 fitment

Same tires and wheels on: 2.0i (ST171)

Generation
T170 · 1987–1992
Power
99 hp
Engine
I4, Petrol
Center bore
54.1 mm
Bolt pattern
5x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
185/65R14 85SRim 14x6 ET45 5x100–

How to read 85S: 85 is the load index (up to 1,135 lb / 515 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Corona 1.8 (ST170) 114 hp · I4 165x R13 2 fitments
Generation
T170 · 1987–1992
Power
114 hp
Engine
I4, Petrol
Center bore
54.1 mm
Bolt pattern
4x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
165x R13Rim 13x5 ET39 4x100–
185/70R13 85SRim 13x5.5 ET39 4x100–
Corona 2.0 D (CT170) 72 hp · I4 · Diesel 165x SR13 2 fitments
Generation
T170 · 1987–1992
Power
72 hp
Engine
I4, Diesel
Center bore
54.1 mm
Bolt pattern
4x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
165x SR13Rim 13x5 ET39 4x100–
185/70R13 85SRim 13x5.5 ET39 4x100–
Corona 2.0i GT-R (ST171) 138 hp · I4 195/60R14 85H 1 fitment
Generation
T170 · 1987–1992
Power
138 hp
Engine
I4, Petrol
Center bore
54.1 mm
Bolt pattern
5x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
195/60R14 85HRim 14x6 ET45 5x100–

How to read 85H: 85 is the load index (up to 1,135 lb / 515 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 1991
6
Generation
IX (T170)
Other years
All years (1985–1996)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator