1995 Toyota Curren tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x100 on every 1995 trim.

Tires for the 1995 Toyota Curren

Sizes most trims come with first. Open your trim below for its exact size.

195/65R14 Best-rated standard on 3 trims

Check price on Amazon · 195/65R14
205/55R15 Best-rated standard on 1 trim

Check price on Amazon · 205/55R15

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1995: 4
Generation: T200
Other years: 1994
1995
1996
1997
1998
All years (1994–1998)

4 trims sold in 1995

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Toyota Curren T200

1994–1998 4 trims

Curren 1.8i (ST208) +2 variants 123 hp · I4 195/65R14 89S 1 fitment

Same tires and wheels on: 2.0i (ST206), 2.0i (ST207)

Generation: T200 · 1994–1998
Power: 123 hp
Engine: I4, Petrol
Center bore: 54.1 mm
Bolt pattern: 5x100
Thread: M12 x 1.5

Check price on Amazon · 195/65R14 Wheels 14x6 ET45 · 5x100 · 54.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
195/65R14 89S	Rim 14x6 ET45 5x100	–

How to read 89S: 89 is the load index (up to 1,279 lb / 580 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Curren 2.0i ZS (ST206) 168 hp · I4 205/55R15 87V 1 fitment

Generation: T200 · 1994–1998
Power: 168 hp
Engine: I4, Petrol
Center bore: 54.1 mm
Bolt pattern: 5x100
Thread: M12 x 1.5

Check price on Amazon · 205/55R15 Wheels 15x6.5 ET45 · 5x100 · 54.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
205/55R15 87V	Rim 15x6.5 ET45 5x100	–

How to read 87V: 87 is the load index (up to 1,202 lb / 545 kg per tire) and V the speed rating (up to 149 mph / 240 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.