2013 Toyota Fortuner tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 6x139.7 on every 2013 trim.

Tires for the 2013 Toyota Fortuner

Sizes most trims come with first. Open your trim below for its exact size.

265/70R16 Best-rated standard on 4 trims

Check price on Amazon · 265/70R16
265/65R17 Best-rated optional on 4 trims

Check price on Amazon · 265/65R17
265/60R18 Best-rated optional on 4 trims

Check price on Amazon · 265/60R18

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2013: 4
Generation: AN50/AN60
Other years: 2009
2010
2011
2012
2013
2014
2015
2016
All years (2005–2026)

4 trims sold in 2013

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Toyota Fortuner AN50/AN60

2011–2015 4 trims

Fortuner 2.5 D-4D +3 variants 142 hp · 2KD-FTV I4 · Diesel 265/70R16 115T 4 fitments

Same tires and wheels on: 2.7 VVT-i, 3.0 D, 4.0 VVT-i

Generation: AN50/AN60 Facelift · 2011–2015
Power: 142 hp
Engine: 2KD-FTV I4, Diesel
Center bore: 106.1 mm
Bolt pattern: 6x139.7
Thread: M12 x 1.5

Check price on Amazon · 265/70R16 Wheels 16x7 ET20 · 6x139.7 · 106.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
265/70R16 115T	Rim 16x7 ET20 ~~6x139.7~~	–
265/65R17 112S	Rim 17x7.5 ET20 ~~6x139.7~~	30 psi
265/60R18	Rim 18x7.5 ET20 ~~6x139.7~~	30 psi
265/60R18	Rim 18x8 ET15 ~~6x139.7~~	30 psi

How to read 115T: 115 is the load index (up to 2,679 lb / 1,215 kg per tire) and T the speed rating (up to 118 mph / 190 km/h). ET20 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.