1982 Toyota Hilux tire and wheel sizes, bolt pattern and tire pressure

Bolt patterns 6x139.7 or 5x114.3, depending on the market version.

Tires for the 1982 Toyota Hilux

Sizes most trims come with first. Open your trim below for its exact size.

185xR14 standard on 1 trim

Check price on Amazon · 185xR14
235/75R15 Best-rated standard on 1 trim

Check price on Amazon · 235/75R15
195xR14 optional on 1 trim

Check price on Amazon · 195xR14

Also listed: 195/70R15

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1982: 2
Generation: III
Other years: 1979
1980
1981
1982
1983
1984
1985
1986
All years (1979–2027)

2 trims sold in 1982

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Toyota Hilux III

1978–1983 2 trims

Hilux 2.2 4WD 63 hp · I4 · Diesel 235/75R15 1 fitment

Generation: III · 1978–1983
Power: 63 hp
Engine: I4, Diesel
Center bore: 106.1 mm
Bolt pattern: 6x139.7
Thread: M12 x 1.5

Check price on Amazon · 235/75R15

Tire size	Rim size and bolt pattern	Pressure, psi
235/75R15	Rim ~~6x139.7~~	–

Hilux 2.2 D 2WD 63 hp · I4 · Diesel 185x R14 89S 3 fitments

Generation: III · 1978–1983
Power: 63 hp
Engine: I4, Diesel
Center bore: 60.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 185xR14 Wheels 14x5.5 ET35 · 5x114.3 · 60.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
185x R14 89S	Rim 14x5.5 ET35 ~~5x114.3~~	29 psi
195x R14 106N	Rim 14x5.5 ET35 ~~5x114.3~~	29 psi
195/70R15 96H	Rim 15x6 ET20 ~~5x114.3~~	29 psi

How to read 89S: 89 is the load index (up to 1,279 lb / 580 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET35 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.