2020 Toyota Innova Crysta tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2020 trim.

Tires for the 2020 Toyota Innova Crysta

Sizes most trims come with first. Open your trim below for its exact size.

205/65R16 Best-rated standard on 8 trims

Check price on Amazon · 205/65R16
215/55R17 Best-rated optional on 8 trims

Check price on Amazon · 215/55R17

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2020: 8
Generation: AN140
Other years: 2016
2017
2018
2019
2020
2021
2022
2023
All years (2015–2026)

8 trims sold in 2020

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Toyota Innova Crysta AN140

2015–2023 8 trims

Innova Crysta 2.0 VVT-i +7 variants 137 hp · 2.0L 1TR-FE I4 205/65R16 95H 3 fitments

Same tires and wheels on: 2.4 D, 2.7 VVT-i, 2.8 D

Generation: AN140 Facelift · 2020–2023
Power: 137 hp
Engine: 2.0L 1TR-FE I4, Petrol
Center bore: 60.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 205/65R16 Wheels 16x6 ET50 · 5x114.3 · 60.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
205/65R16 95H	Rim 16x6 ET50 5x114.3	33 psi
215/55R17 94V	Rim 17x6.5 ET35 5x114.3	33 psi
215/55R17 94V	Rim 17x7 ET42 5x114.3	33 psi

How to read 95H: 95 is the load index (up to 1,521 lb / 690 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET50 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.