1999 Toyota Mark II Qualis tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 1999 trim.

Tires for the 1999 Toyota Mark II Qualis

Sizes most trims come with first. Open your trim below for its exact size.

205/65R15 Best-rated standard on 6 trims

Check price on Amazon · 205/65R15
205/60R16 Best-rated optional on 4 trims

Check price on Amazon · 205/60R16

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1999: 6
Generation: Mark II Qualis
Other years: 1997
1998
1999
2000
2001
2002
All years (1997–2002)

6 trims sold in 1999

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Toyota Mark II Qualis Mark II Qualis

1997–2002 6 trims

Mark II Qualis 2.2i (SXV20W) +3 variants 138 hp · I4 205/65R15 94H 2 fitments

Same tires and wheels on: 2.2i (SXV25W), 2.5i (MCV21W), 2.5i (MCV25W)

Generation: Mark II Qualis · 1997–2002
Power: 138 hp
Engine: I4, Petrol
Center bore: 60.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 205/65R15 Wheels 15x6 ET45 · 5x114.3 · 60.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
205/65R15 94H	Rim 15x6 ET45 5x114.3	–
205/60R16 92H	Rim 16x6 ET45 5x114.3	–

How to read 94H: 94 is the load index (up to 1,477 lb / 670 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Mark II Qualis 3.0i (MCV20W) +1 variant 212 hp · V6 205/65R15 94H 1 fitment

2 versions of this trim share these tires and wheels.

Generation: Mark II Qualis · 1997–2002
Power: 212 hp
Engine: V6, Petrol
Center bore: 60.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 205/65R15 Wheels 15x6 ET45 · 5x114.3 · 60.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
205/65R15 94H	Rim 15x6 ET45 5x114.3	–

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.