2005 Toyota MR-S tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 2005 trim.

Tires for the 2005 Toyota MR-S

Sizes most trims come with first. Open your trim below for its exact size.

185/55R15 front + 215/45R16 rear Best-rated standard on 1 trim

Check price on Amazon · 185/55R15 front Check price on Amazon · 215/45R16 rear
185/55R15 front + 205/50R15 rear Best-rated optional on 1 trim

Check price on Amazon · 185/55R15 front Check price on Amazon · 205/50R15 rear

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2005: 1
Generation: III (W30)
Other years: 2000
2001
2002
2003
2004
2005
2006
2007
All years (1999–2007)

1 trim sold in 2005

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Toyota MR-S III (W30)

2002–2007 1 trim

MR-S 1.8i (TA-ZZW30) 138 hp · 1ZZ-FE I4 185/55R15 81V / 215/45R16 86W 2 fitments

Generation: W30 Facelift · 2002–2007
Power: 138 hp
Engine: 1ZZ-FE I4, Petrol
Center bore: 54.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.5

Check price on Amazon · 185/55R15 Check price on Amazon · 215/45R16 Wheels 15x6 ET45 · 4x100 · 54.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
Front185/55R15 81V	Rim 15x6 ET45 4x100	–
Rear215/45R16 86W	Rim 16x7 ET45 4x100	–
Front185/55R15 81V	Rim 15x6 ET45 4x100	–
Rear205/50R15 85V	Rim 15x6.5 ET45 4x100	–

How to read 81V: 81 is the load index (up to 1,019 lb / 462 kg per tire) and V the speed rating (up to 149 mph / 240 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.