1990 Toyota Sprinter Trueno tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 1990 trim.

Tires for the 1990 Toyota Sprinter Trueno

Sizes most trims come with first. Open your trim below for its exact size.

  1. 155xR13 standard on 1 trim
  2. 185/60R14 Best-rated standard on 1 trim
  3. 195/60R14 Best-rated standard on 1 trim

Also listed: 175/70R13 175/65R14

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1990
3
Generation
V

3 trims sold in 1990

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Toyota Sprinter Trueno V

1987–1991 3 trims
Sprinter Trueno 1.5i (AE91) 93 hp · I4 155x SR13 3 fitments
Generation
V · 1987–1991
Power
93 hp
Engine
I4, Petrol
Center bore
54.1 mm
Bolt pattern
4x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
155x SR13Rim 13x5 ET39 4x100–
175/70R13 82SRim 13x5 ET45 4x100–
175/65R14 82SRim 14x5.5 ET45 4x100–
Sprinter Trueno 1.6i (AE92) 138 hp · I4 185/60R14 82H 1 fitment
Generation
V · 1987–1991
Power
138 hp
Engine
I4, Petrol
Center bore
54.1 mm
Bolt pattern
4x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
185/60R14 82HRim 14x5.5 ET39 4x100–

How to read 82H: 82 is the load index (up to 1,047 lb / 475 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET39 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Sprinter Trueno 1.6i Turbo (AE92) 162 hp · I4 195/60R14 85H 1 fitment
Generation
V · 1987–1991
Power
162 hp
Engine
I4, Petrol
Center bore
54.1 mm
Bolt pattern
4x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
195/60R14 85HRim 14x5.5 ET39 4x100–

How to read 85H: 85 is the load index (up to 1,135 lb / 515 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET39 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 1990
3
Generation
V
Other years
All years (1983–2000)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator