2017 Toyota SW4 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 6x139.7 on every 2017 trim.

Tires for the 2017 Toyota SW4

Sizes most trims come with first. Open your trim below for its exact size.

  1. 265/65R17 Best-rated standard on 2 trims
  2. 265/60R18 Best-rated standard on 1 trim · optional on 2
  3. 265/55R19 Best-rated optional on 3 trims

Also listed: 275/55R19

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2017
3
Generation
II (AN150, AN160)

3 trims sold in 2017

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Toyota SW4 II (AN150, AN160)

2015–2023 3 trims
SW4 2.7 VVT-i +1 variant 161 hp · 2TR-FBE I4 Flex-Fuel 265/65R17 112S 3 fitments

Same tires and wheels on: 2.8 D-4D

Generation
AN150/AN160 · 2015–2023
Power
161 hp
Engine
2TR-FBE I4 Flex-Fuel
Center bore
106.1 mm
Bolt pattern
6x139.7
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
265/65R17 112SRim 17x7.5 ET30 6x139.729 psi
265/60R18 110HRim 18x7.5 ET30 6x139.729 psi
265/55R19 109HRim 19x8 ET30 6x139.732 psi

How to read 112S: 112 is the load index (up to 2,469 lb / 1,120 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET30 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

SW4 4.0 VVT-i 235 hp · 1GR-FE V6 265/60R18 110H 3 fitments
Generation
AN150/AN160 · 2015–2023
Power
235 hp
Engine
1GR-FE V6, Petrol
Center bore
106.1 mm
Bolt pattern
6x139.7
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
265/60R18 110HRim 18x7.5 ET30 6x139.729 psi
265/55R19 109VRim 19x8 ET30 6x139.732 psi
275/55R19 111VRim 19x8 ET30 6x139.732 psi

How to read 110H: 110 is the load index (up to 2,337 lb / 1,060 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET30 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 2017
3
Generation
II (AN150, AN160)
Other years
All years (2005–2026)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator