Aston Martin Bulldog MP
1979–1982 1 trimBulldog 5.3 599 hp · V8 235/40R19 / 275/35R19 2 fitments
- Generation
- MP · 1979–1982
- Power
- 599 hp
- Engine
- V8, Petrol
- Center bore
- 68.1 mm
- Bolt pattern
- 5x114.3
- Thread
- 1/2" - 20 UNF
1980 Aston Martin Bulldog tire and wheel sizes, bolt pattern and tire pressure
Bolt pattern 5x114.3 on every 1980 trim.
Tires for the 1980 Aston Martin Bulldog
Sizes most trims come with first. Open your trim below for its exact size.
TireWheelGuide may earn a commission from purchases made through these links.
1 trim sold in 1980
Open a trim for its tire and rim sizes, bolt pattern and tire pressure.
No trims match these filters
Try a trim name or an engine size like 2.0L.
What these columns mean
- Rim size
- Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
- Bolt pattern (PCD)
- Number of studs and the diameter of the circle they sit on. It must match exactly.
- Center bore
- Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
- Pressure
- Recommended cold inflation pressure for that axle, in psi.
- Staggered
- A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
- Thread size
- Lug bolt or nut thread — needed when buying aftermarket fasteners.
Considering a different size?
Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.
