1995 Cadillac DeVille tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x115 on every 1995 trim.

Tires for the 1995 Cadillac DeVille

Sizes most trims come with first. Open your trim below for its exact size.

205/70R15 Best-rated standard on 2 trims

Check price on Amazon · 205/70R15
215/70R15 Best-rated optional on 2 trims

Check price on Amazon · 215/70R15
225/60R16 Best-rated optional on 2 trims

Check price on Amazon · 225/60R16

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1995: 2
Generation: K-body
Other years: 1991
1992
1993
1994
1995
1996
1997
1998
All years (1971–2005)

2 trims sold in 1995

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Cadillac DeVille K-body

1994–1999 2 trims

DeVille 4.6i +1 variant 275 hp · LD8 V8 205/70R15 98S 4 fitments

Same tires and wheels on: 4.9i

Generation: K-body · 1994–1999
Power: 275 hp
Engine: LD8 V8, Petrol
Center bore: 70.3 mm
Bolt pattern: 5x115
Thread: M12 x 1.5

Check price on Amazon · 205/70R15 Wheels 15x6 ET53 · 5x115 · 70.3 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
205/70R15 98S	Rim 15x6 ET53 5x115	32 psi
215/70R15 99S	Rim 15x6.5 ET51 5x115	32 psi
225/60R16 97H	Rim 16x7 ET49 5x115	32 psi
225/55R17 97V	Rim 17x7 ET48 5x115	35 psi

How to read 98S: 98 is the load index (up to 1,653 lb / 750 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET53 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.