2000 Daihatsu Altis tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2000 trim.

Tires for the 2000 Daihatsu Altis

Sizes most trims come with first. Open your trim below for its exact size.

205/65R15 Best-rated standard on 2 trims

Check price on Amazon · 205/65R15
215/60R16 Best-rated optional on 2 trims

Check price on Amazon · 215/60R16
215/55R17 Best-rated optional on 2 trims

Check price on Amazon · 215/55R17

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2000: 2
Generation: SXV20
Other years: 2000
2001
2002
2003
2004
2005
2006
2007
All years (2000–2023)

2 trims sold in 2000

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Daihatsu Altis SXV20

2000–2001 2 trims

Altis 2.2i (GF-SXV20N) +1 variant 138 hp · 5S-FE I4 205/65R15 91V 3 fitments

Same tires and wheels on: 2.2i (GF-SXV25N)

Generation: SXV20 · 2000–2001
Power: 138 hp
Engine: 5S-FE I4, Petrol
Center bore: 60.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 205/65R15 Wheels 15x6 ET45 · 5x114.3 · 60.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
205/65R15 91V	Rim 15x6 ET45 ~~5x114.3~~	32 psi
215/60R16 91V	Rim 16x6.5 ET45 ~~5x114.3~~	32 psi
215/55R17 91V	Rim 17x7 ET40 ~~5x114.3~~	32 psi

How to read 91V: 91 is the load index (up to 1,356 lb / 615 kg per tire) and V the speed rating (up to 149 mph / 240 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.