2011 Daihatsu Be-Go tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2011 trim.

Tires for the 2011 Daihatsu Be-Go

Sizes most trims come with first. Open your trim below for its exact size.

215/65R16 Best-rated standard on 2 trims

Check price on Amazon · 215/65R16
225/65R16 Best-rated optional on 2 trims

Check price on Amazon · 225/65R16
215/60R17 Best-rated optional on 2 trims

Check price on Amazon · 215/60R17

Also listed: 225/60R17 235/55R17 235/50R18

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2011: 2
Generation: J200
Other years: 2007
2008
2009
2010
2011
2012
2013
2014
All years (2006–2016)

2 trims sold in 2011

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Daihatsu Be-Go J200

2008–2016 2 trims

Be-Go 1.5i (ABA-J200G) +1 variant 107 hp · I4 215/65R16 98S 6 fitments

Same tires and wheels on: 1.5i (ABA-J210G)

Generation: J200 Facelift · 2008–2016
Power: 107 hp
Engine: I4, Petrol
Center bore: 66.7 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 215/65R16 Wheels 16x6 ET50 · 5x114.3 · 66.7 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
215/65R16 98S	Rim 16x6 ET50 ~~5x114.3~~	29 psi
225/65R16 98S	Rim 16x6.5 ET47 ~~5x114.3~~	29 psi
215/60R17 98T	Rim 17x6.5 ET47 ~~5x114.3~~	29 psi
225/60R17 98T	Rim 17x7 ET43 ~~5x114.3~~	29 psi
235/55R17 97H	Rim 17x7 ET43 ~~5x114.3~~	30 psi
235/50R18 97H	Rim 18x7.5 ET40 ~~5x114.3~~	30 psi

How to read 98S: 98 is the load index (up to 1,653 lb / 750 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET50 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.