2011 Daihatsu Boon Luminas tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 2011 trim.

Tires for the 2011 Daihatsu Boon Luminas

Sizes most trims come with first. Open your trim below for its exact size.

185/55R15 Best-rated standard on 1 trim · optional on 1

Check price on Amazon · 185/55R15
175/65R14 Best-rated standard on 1 trim

Check price on Amazon · 175/65R14

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2011: 2
Generation: Boon Luminas
Other years: 2008
2009
2010
2011
2012
All years (2008–2012)

2 trims sold in 2011

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Daihatsu Boon Luminas Boon Luminas

2008–2012 2 trims

Boon Luminas 1.5i (CBA-M502G) 107 hp · I4 175/65R14 82S 2 fitments

Generation: Boon Luminas · 2008–2012
Power: 107 hp
Engine: I4, Petrol
Center bore: 54.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.5

Check price on Amazon · 175/65R14 Wheels 14x5 ET40 · 4x100 · 54.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
175/65R14 82S	Rim 14x5 ET40 4x100	–
185/55R15 82V	Rim 15x6 ET45 4x100	–

How to read 82S: 82 is the load index (up to 1,047 lb / 475 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET40 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Boon Luminas 1.5i (CBA-M512G) 107 hp · I4 185/55R15 82V 1 fitment

Generation: Boon Luminas · 2008–2012
Power: 107 hp
Engine: I4, Petrol
Center bore: 54.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.5

Check price on Amazon · 185/55R15 Wheels 15x6 ET45 · 4x100 · 54.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
185/55R15 82V	Rim 15x6 ET45 4x100	–

How to read 82V: 82 is the load index (up to 1,047 lb / 475 kg per tire) and V the speed rating (up to 149 mph / 240 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.