2013 Daihatsu Boon tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 2013 trim.

Tires for the 2013 Daihatsu Boon

Sizes most trims come with first. Open your trim below for its exact size.

  1. 155/80R13 Best-rated standard on 2 trims
  2. 165/70R14 Best-rated optional on 2 trims
  3. 175/65R14 Best-rated optional on 2 trims

Also listed: 185/60R14 185/55R15

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2013
2
Generation
M600

2 trims sold in 2013

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Daihatsu Boon M600

2010–2014 2 trims
Boon 1.0i (DBA-M600S) +1 variant 68 hp · I3 155/80R13 79S 5 fitments

Same tires and wheels on: 1.0i (DBA-M610S)

Generation
M600 · 2010–2014
Power
68 hp
Engine
I3, Petrol
Center bore
54.1 mm
Bolt pattern
4x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
155/80R13 79SRim 13x4.5 ET35 4x10026 psi
165/70R14 81SRim 14x5 ET40 4x10026 psi
175/65R14 81SRim 14x5 ET40 4x10028 psi
185/60R14 79SRim 14x5.5 ET38 4x10028 psi
185/55R15 78TRim 15x5.5 ET38 4x10029 psi

How to read 79S: 79 is the load index (up to 963 lb / 437 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET35 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 2013
2
Generation
M600
Other years
All years (2004–2023)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator