2019 Daihatsu Hijet tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 2019 trim.

Tires for the 2019 Daihatsu Hijet

Sizes most trims come with first. Open your trim below for its exact size.

145/80R12 Best-rated standard on 12 trims

Check price on Amazon · 145/80R12
155/65R13 Best-rated optional on 12 trims

Check price on Amazon · 155/65R13
165/65R13 Best-rated optional on 12 trims

Check price on Amazon · 165/65R13

Also listed: 165/55R14 185/50R14 185/45R15

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2019: 12
Generation: S320
Other years: 2015
2016
2017
2018
2019
2020
2021
2022
All years (1987–2026)

12 trims sold in 2019

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Daihatsu Hijet S320

2017–2021 12 trims

Hijet 0.66i (EBD-S321V) AT +11 variants 52 hp · 0.66L KF I3 145/80R12 80N 6 fitments

Same tires and wheels on: 0.66i (EBD-S331V) AT, 0.66i (HBD-S321V), 0.66i (HBD-S331V), 0.66i AT (EBD-S321W), 0.66i AT (EBD-S331W), 0.66i MT (EBD-S321V), 0.66i MT (EBD-S321W), 0.66i MT (EBD-S331V), 0.66i MT (EBD-S331W), 0.66i Turbo (EBD-S321V), 0.66i Turbo (EBD-S331V)

Generation: S320 Facelift · 2017–2021
Power: 52 hp
Engine: 0.66L KF I3, Petrol
Center bore: 54.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.5

Check price on Amazon · 145/80R12 Wheels 12x4 ET40 · 4x100 · 54.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
145/80R12 80N	Rim 12x4 ET40 ~~4x100~~	41 psi
155/65R13 78S	Rim 13x4.5 ET40 ~~4x100~~	32 psi
165/65R13 78S	Rim 13x4.5 ET45 ~~4x100~~	28 psi
165/55R14 76T	Rim 14x5 ET45 ~~4x100~~	33 psi
185/50R14 76H	Rim 14x5.5 ET42 ~~4x100~~	35 psi
185/45R15 75V	Rim 15x6 ET38 ~~4x100~~	36 psi

How to read 80N: 80 is the load index (up to 992 lb / 450 kg per tire) and N the speed rating (up to 87 mph / 140 km/h). ET40 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.