1988 Daihatsu Rugger tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x139.7 on every 1988 trim.

Tires for the 1988 Daihatsu Rugger

Sizes most trims come with first. Open your trim below for its exact size.

255xR15 standard on 1 trim

Check price on Amazon · 255xR15
255/65R16 Best-rated optional on 1 trim

Check price on Amazon · 255/65R16
265/60R17 Best-rated optional on 1 trim

Check price on Amazon · 265/60R17

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1988: 1
Generation: F70/75/77
Other years: 1984
1985
1986
1987
1988
1989
1990
1991
All years (1984–2002)

1 trim sold in 1988

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Daihatsu Rugger F70/75/77

1984–1991 1 trim

Rugger 2.8TD 93 hp · I4 · Diesel 255x R15 106S 3 fitments

Generation: F70/75/77 · 1984–1991
Power: 93 hp
Engine: I4, Diesel
Center bore: 108.1 mm
Bolt pattern: 5x139.7
Thread: M12 x 1.5

Check price on Amazon · 255xR15 Wheels 15x7.5 ET5 · 5x139.7 · 108.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
255x R15 106S	Rim 15x7.5 ET5 5x139.7	26 psi
255/65R16 106S	Rim 16x7.5 ET5 5x139.7	26 psi
265/60R17 104T	Rim 17x8 ET0 5x139.7	29 psi

How to read 106S: 106 is the load index (up to 2,094 lb / 950 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET5 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.