1993 Ford Crown Victoria tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 1993 trim.

Tires for the 1993 Ford Crown Victoria

Sizes most trims come with first. Open your trim below for its exact size.

215/70R15 Best-rated standard on 1 trim

Check price on Amazon · 215/70R15
225/70R15 Best-rated optional on 1 trim

Check price on Amazon · 225/70R15
225/60R16 Best-rated optional on 1 trim

Check price on Amazon · 225/60R16

Also listed: 235/60R16 225/55R17 235/55R17

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1993: 1
Generation: I (EN53)
Other years: 1992
1993
1994
1995
1996
1997
1998
1999
All years (1992–2011)

1 trim sold in 1993

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Ford Crown Victoria I (EN53)

1992–1997 1 trim

Crown Victoria 4.6 190 hp · 4.6L V8 215/70R15 97S 7 fitments

Generation: EN53 · 1992–1997
Power: 190 hp
Engine: 4.6L V8, Petrol
Center bore: 70.5 mm
Bolt pattern: 5x114.3
Thread: 1/2" - 20 UNF

Check price on Amazon · 215/70R15 Wheels 15x6.5 ET11.4 · 5x114.3 · 70.5 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
215/70R15 97S	Rim 15x6.5 ET11.4 ~~5x114.3~~	32 psi
215/70R15 97S	Rim 15x6.5 ET8.9 ~~5x114.3~~	32 psi
225/70R15 100S	Rim 15x6.5 ET8.9 ~~5x114.3~~	32 psi
225/60R16 98T	Rim 16x7 ET6.4 ~~5x114.3~~	32 psi
235/60R16 100T	Rim 16x7 ET6.4 ~~5x114.3~~	32 psi
225/55R17 97T	Rim 17x7 ET12 ~~5x114.3~~	32 psi
235/55R17 99T	Rim 17x7 ET12 ~~5x114.3~~	32 psi

How to read 97S: 97 is the load index (up to 1,609 lb / 730 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET11.4 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.