2000 Ford Windstar tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x108 on every 2000 trim.

Tires for the 2000 Ford Windstar

Sizes most trims come with first. Open your trim below for its exact size.

205/70R15 Best-rated standard on 2 trims

Check price on Amazon · 205/70R15
215/70R15 Best-rated optional on 2 trims

Check price on Amazon · 215/70R15
215/65R16 Best-rated optional on 1 trim

Check price on Amazon · 215/65R16

Also listed: 225/60R16

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2000: 2
Generation: II
Other years: 1996
1997
1998
1999
2000
2001
2002
2003
All years (1994–2003)

2 trims sold in 2000

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Ford Windstar II

1998–2003 2 trims

Windstar 3.0 150 hp · V6 205/70R15 95S 2 fitments

Generation: II · 1998–2003
Power: 150 hp
Engine: V6, Petrol
Center bore: 63.4 mm
Bolt pattern: 5x108
Thread: M12 x 1.5

Check price on Amazon · 205/70R15 Wheels 15x6 ET42 · 5x108 · 63.4 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
205/70R15 95S	Rim 15x6 ET42 ~~5x108~~	35 psi
215/70R15 97S	Rim 15x6.5 ET42 ~~5x108~~	35 psi

How to read 95S: 95 is the load index (up to 1,521 lb / 690 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET42 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Windstar 3.8 200 hp · V6 205/70R15 95S 4 fitments

Generation: II · 1998–2003
Power: 200 hp
Engine: V6, Petrol
Center bore: 63.4 mm
Bolt pattern: 5x108
Thread: M12 x 1.5

Check price on Amazon · 205/70R15 Wheels 15x6.5 ET42 · 5x108 · 63.4 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
205/70R15 95S	Rim 15x6.5 ET42 ~~5x108~~	35 psi
215/70R15 97S	Rim 15x6.5 ET42 ~~5x108~~	35 psi
225/60R16 97S	Rim 16x6.5 ET42 ~~5x108~~	35 psi
215/65R16 96S	Rim 16x7 ET42 ~~5x108~~	35 psi

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.