2009 GAC Toyota Highlander tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2009 trim.

Tires for the 2009 GAC Toyota Highlander

Sizes most trims come with first. Open your trim below for its exact size.

245/60R18 Best-rated standard on 1 trim · optional on 1

Check price on Amazon · 245/60R18
245/65R17 Best-rated standard on 1 trim

Check price on Amazon · 245/65R17
245/55R19 Best-rated optional on 2 trims

Check price on Amazon · 245/55R19

Also listed: 265/50R19

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2009: 2
Generation: XU40
Other years: 2009
2010
2011
2012
2013
2014
2015
2016
All years (2009–2020)

2 trims sold in 2009

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

GAC Toyota Highlander XU40

2009–2011 2 trims

Highlander 2.7i 188 hp · 1AR-FE I4 245/65R17 105H 3 fitments

Generation: XU40 · 2009–2011
Power: 188 hp
Engine: 1AR-FE I4, Petrol
Center bore: 60.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 245/65R17 Wheels 17x7.5 ET35 · 5x114.3 · 60.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
245/65R17 105H	Rim 17x7.5 ET35 5x114.3	30 psi
245/60R18 105H	Rim 18x7.5 ET35 5x114.3	30 psi
245/55R19 103H	Rim 19x7.5 ET35 5x114.3	30 psi

How to read 105H: 105 is the load index (up to 2,039 lb / 925 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET35 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Highlander 3.5i 270 hp · 2GR-FE V6 245/60R18 105H 3 fitments

Generation: XU40 · 2009–2011
Power: 270 hp
Engine: 2GR-FE V6, Petrol
Center bore: 60.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 245/60R18 Wheels 18x7.5 ET35 · 5x114.3 · 60.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
245/60R18 105H	Rim 18x7.5 ET35 5x114.3	30 psi
245/55R19 103H	Rim 19x7.5 ET35 5x114.3	30 psi
265/50R19 110V	Rim 19x8 ET35 5x114.3	33 psi

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.