2018 GAC Toyota Highlander tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2018 trim.

Tires for the 2018 GAC Toyota Highlander

Sizes most trims come with first. Open your trim below for its exact size.

245/60R18 Best-rated standard on 1 trim

Check price on Amazon · 245/60R18
245/55R19 Best-rated optional on 1 trim

Check price on Amazon · 245/55R19
265/50R19 Best-rated optional on 1 trim

Check price on Amazon · 265/50R19

Also listed: 265/45R20

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2018: 1
Generation: XU50
Other years: 2013
2014
2015
2016
2017
2018
2019
2020
All years (2009–2020)

1 trim sold in 2018

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

GAC Toyota Highlander XU50

2018–2023 1 trim

Highlander 2.0T 217 hp · 8AR-FTS I4 245/60R18 105H 4 fitments

Generation: XU50 Facelift · 2018–2023
Power: 217 hp
Engine: 8AR-FTS I4, Petrol
Center bore: 60.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 245/60R18 Wheels 18x7.5 ET30 · 5x114.3 · 60.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
245/60R18 105H	Rim 18x7.5 ET30 5x114.3	35 psi
245/55R19 105H	Rim 19x7.5 ET30 5x114.3	33 psi
265/50R19 110V	Rim 19x8 ET30 5x114.3	36 psi
265/45R20 108V	Rim 20x8 ET30 5x114.3	36 psi

How to read 105H: 105 is the load index (up to 2,039 lb / 925 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET30 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.