1993 Mazda Efini MS-9 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 1993 trim.

Tires for the 1993 Mazda Efini MS-9

Sizes most trims come with first. Open your trim below for its exact size.

205/65R15 Best-rated standard on 6 trims

Check price on Amazon · 205/65R15
215/55R16 Best-rated standard on 1 trim · optional on 6

Check price on Amazon · 215/55R16
215/50R17 Best-rated optional on 1 trim

Check price on Amazon · 215/50R17

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1993: 7
Generation: HD
Other years: 1991
1992
1993
1994
All years (1991–1994)

7 trims sold in 1993

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Mazda Efini MS-9 HD

1991–1994 7 trims

Efini MS-9 2.5 I (E-HD5S) +5 variants 158 hp · I4 205/65R15 93H 2 fitments

Same tires and wheels on: 2.5 II (E-HD5S), 2.5 III (E-HD5S), 2.5 SE (E-HD5S), 3.0 III (E-HDES), 3.0 IV (E-HDES)

Generation: HD · 1991–1994
Power: 158 hp
Engine: I4, Petrol
Center bore: 67.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 205/65R15 Wheels 15x6 ET50 · 5x114.3 · 67.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
205/65R15 93H	Rim 15x6 ET50 ~~5x114.3~~	30 psi
215/55R16 93V	Rim 16x6.5 ET50 ~~5x114.3~~	30 psi

How to read 93H: 93 is the load index (up to 1,433 lb / 650 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET50 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

Efini MS-9 3.0 J (E-HDES) 197 hp · V6 215/55R16 93H 2 fitments

Generation: HD · 1991–1994
Power: 197 hp
Engine: V6, Petrol
Center bore: 67.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 215/55R16 Wheels 16x6 ET50 · 5x114.3 · 67.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
215/55R16 93H	Rim 16x6 ET50 ~~5x114.3~~	30 psi
215/50R17 91V	Rim 17x6.5 ET50 ~~5x114.3~~	33 psi

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.