2000 Mazda Proceed Levante tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x139.7 on every 2000 trim.

Tires for the 2000 Mazda Proceed Levante

Sizes most trims come with first. Open your trim below for its exact size.

235/60R16 Best-rated standard on 2 trims

Check price on Amazon · 235/60R16
235/55R17 Best-rated optional on 2 trims

Check price on Amazon · 235/55R17
235/50R18 Best-rated optional on 2 trims

Check price on Amazon · 235/50R18

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2000: 2
Generation: TJ/TF
Other years: 1995
1996
1997
1998
1999
2000
All years (1995–2000)

2 trims sold in 2000

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Mazda Proceed Levante TJ/TF

1997–2000 2 trims

Proceed Levante 2.0TD (KD-TJ32W) 91 hp · I4 · Diesel 235/60R16 100H 3 fitments

Generation: TJ/TF Facelift · 1997–2000
Power: 91 hp
Engine: I4, Diesel
Center bore: 108 mm
Bolt pattern: 5x139.7
Thread: M12 x 1.5

Check price on Amazon · 235/60R16 Wheels 16x7 ET25 · 5x139.7 · 108 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
235/60R16 100H	Rim 16x7 ET25 ~~5x139.7~~	29 psi
235/55R17 98H	Rim 17x7 ET25 ~~5x139.7~~	32 psi
235/50R18 97H	Rim 18x7.5 ET20 ~~5x139.7~~	32 psi

How to read 100H: 100 is the load index (up to 1,764 lb / 800 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET25 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

Proceed Levante 2.5i (GF-TJ62W) 158 hp · V6 235/60R16 100H 3 fitments

Generation: TJ/TF Facelift · 1997–2000
Power: 158 hp
Engine: V6, Petrol
Center bore: 108 mm
Bolt pattern: 5x139.7
Thread: M12 x 1.5

Check price on Amazon · 235/60R16 Wheels 16x7 ET25 · 5x139.7 · 108 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
235/60R16 100H	Rim 16x7 ET25 ~~5x139.7~~	29 psi
235/55R17 98H	Rim 17x7 ET25 ~~5x139.7~~	32 psi
235/50R18 97V	Rim 18x7.5 ET20 ~~5x139.7~~	32 psi

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.