2001 Mazda RX-7 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2001 trim.

Tires for the 2001 Mazda RX-7

Sizes most trims come with first. Open your trim below for its exact size.

  1. 235/45R17 front + 255/40R17 rear Best-rated standard on 2 trims
  2. 225/50R16 Best-rated standard on 1 trim · optional on 2
  3. 235/40R18 front + 265/35R18 rear Best-rated optional on 2 trims

Also listed: 235/45R17 235/40R18

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2001
3
Generation
FD

3 trims sold in 2001

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Mazda RX-7 FD

1992–2003 3 trims
RX-7 1.3 Turbo (GF-FD3S) +1 variant 276 hp · 13B R 235/45R17 / 255/40R17 3 fitments

2 versions of this trim share these tires and wheels.

Generation
FD · 1992–2003
Power
276 hp
Engine
13B R, Petrol
Center bore
67.1 mm
Bolt pattern
5x114.3
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
Front235/45R17Rim 17x8 ET50 5x114.3–
Rear255/40R17Rim 17x8.5 ET50 5x114.3–
Front235/40R18Rim 18x8 ET45 5x114.3–
Rear265/35R18Rim 18x9 ET45 5x114.3–
225/50R16 92VRim 16x8 ET50 5x114.3–
RX-7 1.3 Turbo (GF-FD3S) 261 hp · 13B R 225/50R16 92V 3 fitments
Generation
FD · 1992–2003
Power
261 hp
Engine
13B R, Petrol
Center bore
67.1 mm
Bolt pattern
5x114.3
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
225/50R16 92VRim 16x8 ET50 5x114.3–
235/45R17Rim 17x8.5 ET50 5x114.332 psi
235/40R18Rim 18x9 ET45 5x114.332 psi

How to read 92V: 92 is the load index (up to 1,389 lb / 630 kg per tire) and V the speed rating (up to 149 mph / 240 km/h). ET50 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 2001
3
Generation
FD
Other years
All years (1979–2003)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator