1990 Mazda Savanna RX-7 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 1990 trim.

Tires for the 1990 Mazda Savanna RX-7

Sizes most trims come with first. Open your trim below for its exact size.

  1. 205/55R16 front + 225/50R16 rear Best-rated standard on 2 trims
  2. 205/60R15 Best-rated standard on 1 trim · optional on 1
  3. 205/55R16 Best-rated optional on 3 trims

Also listed: 205/50R17 + 225/45R17 215/45R17 + 235/40R17

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1990
3
Generation
FC

3 trims sold in 1990

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Mazda Savanna RX-7 FC

1985–1991 3 trims
Savanna RX-7 1.3 Turbo (E-FC3S) 212 hp · 13B R 205/55VR16 / 225/50VR16 4 fitments
Generation
FC · 1985–1991
Power
212 hp
Engine
13B R, Petrol
Center bore
59.6 mm
Bolt pattern
5x114.3
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
Front205/55VR16Rim 16x7 ET40 5x114.3–
Rear225/50VR16Rim 16x7.5 ET40 5x114.3–
Front205/50R17Rim 17x7 ET40 5x114.3–
Rear225/45R17Rim 17x8 ET40 5x114.3–
Front215/45R17Rim 17x7 ET40 5x114.3–
Rear235/40R17Rim 17x8 ET40 5x114.3–
205/55VR16Rim 16x7 ET40 5x114.3–
Savanna RX-7 1.3 Turbo (E-FC3S) 202 hp · 13B R 205/55VR16 / 225/50VR16 4 fitments
Generation
FC · 1985–1991
Power
202 hp
Engine
13B R, Petrol
Center bore
59.6 mm
Bolt pattern
5x114.3
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
Front205/55VR16Rim 16x7 ET40 5x114.3–
Rear225/50VR16Rim 16x7.5 ET40 5x114.3–
205/60HR15Rim 15x6 ET40 5x114.3–
205/60VR15Rim 15x6.5 ET40 5x114.3–
205/55VR16Rim 16x7 ET40 5x114.3–
Savanna RX-7 1.3 Turbo (E-FC3С) 202 hp · 13B R 205/60HR15 4 fitments
Generation
FC · 1985–1991
Power
202 hp
Engine
13B R, Petrol
Center bore
59.6 mm
Bolt pattern
5x114.3
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
205/60HR15Rim 15x6 ET40 5x114.3–
205/60VR15Rim 15x6.5 ET40 5x114.3–
205/55VR16Rim 16x7 ET40 5x114.3–
205/55VR16Rim 16x7.5 ET40 5x114.3–
What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 1990
3
Generation
FC
Other years
All years (1985–1997)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator