2014 Mercedes-Benz GLA-Class AMG tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x112 on every 2014 trim.

Tires for the 2014 Mercedes-Benz GLA-Class AMG

Sizes most trims come with first. Open your trim below for its exact size.

  1. 215/55R18 Best-rated standard on 1 trim
  2. 235/50R18 Best-rated optional on 1 trim
  3. 235/45R19 Best-rated optional on 1 trim

Also listed: 235/40R20 255/35R20

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2014
1
Generation
X156

1 trim sold in 2014

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Mercedes-Benz GLA-Class AMG X156

2013–2019 1 trim
GLA-Class AMG GLA 45 355 hp · 2.0L M133 I4 215/55R18 99V 6 fitments
Generation
X156 · 2013–2019
Power
355 hp
Engine
2.0L M133 I4, Petrol
Center bore
66.6 mm
Bolt pattern
5x112
Thread
M14 x 1.5
Tire sizeRim size and bolt patternPressure, psi
215/55R18 99VRim 18x7 ET46 5x11233 psi
235/50R18 97VRim 18x7.5 ET42.5 5x11233 psi
235/45R19 99YRim 19x8 ET43.5 5x11233 psi
235/45R19 99VRim 19x8 ET43.5 5x11233 psi
235/40R20 96YRim 20x8 ET43.5 5x11235 psi
255/35R20 95ZRim 20x8.5 ET38 5x11236 psi

How to read 99V: 99 is the load index (up to 1,709 lb / 775 kg per tire) and V the speed rating (up to 149 mph / 240 km/h). ET46 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 2014
1
Generation
X156
Other years
All years (2014–2026)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator