2013 Mercedes-Benz SLK-Class AMG tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x112 on every 2013 trim.

Tires for the 2013 Mercedes-Benz SLK-Class AMG

Sizes most trims come with first. Open your trim below for its exact size.

235/40R18 front + 255/35R18 rear Best-rated standard on 1 trim

Check price on Amazon · 235/40R18 front Check price on Amazon · 255/35R18 rear
235/40R18 Best-rated optional on 1 trim

Check price on Amazon · 235/40R18
235/35R19 front + 265/30R19 rear Best-rated optional on 1 trim

Check price on Amazon · 235/35R19 front Check price on Amazon · 265/30R19 rear

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2013: 1
Generation: R172
Other years: 2009
2010
2011
2012
2013
2014
2015
2016
All years (2000–2016)

1 trim sold in 2013

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Mercedes-Benz SLK-Class AMG R172

2011–2016 1 trim

SLK-Class AMG SLK 55 AMG 416 hp · 5.5L V8 235/40R18 95Y / 255/35R18 94Y 4 fitments

Generation: R172 · 2011–2016
Power: 416 hp
Engine: 5.5L V8, Petrol
Center bore: 66.6 mm
Bolt pattern: 5x112
Thread: M14 x 1.5

Check price on Amazon · 235/40R18 Check price on Amazon · 255/35R18 Wheels 18x8 ET43 · 5x112 · 66.6 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
Front235/40R18 95Y	Rim 18x8 ET43 ~~5x112~~	32 psi
Rear255/35R18 94Y	Rim 18x9 ET42 ~~5x112~~	36 psi
Front235/40R18 95H	Rim 18x8 ET43 ~~5x112~~	32 psi
Rear255/35R18 94H	Rim 18x9 ET42 ~~5x112~~	36 psi
Front235/35R19 93Y	Rim 19x8 ET40 ~~5x112~~	32 psi
Rear265/30R19 93Y	Rim 19x9 ET40 ~~5x112~~	36 psi
235/40R18 95H	Rim 18x8 ET43 ~~5x112~~	32 psi

How to read 95Y: 95 is the load index (up to 1,521 lb / 690 kg per tire) and Y the speed rating (up to 186 mph / 300 km/h). ET43 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.