1975 Mercedes-Benz T2 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 6x205 on every 1975 trim.

Tires for the 1975 Mercedes-Benz T2

Sizes most trims come with first. Open your trim below for its exact size.

215/75R16 Best-rated standard on 10 trims

Check price on Amazon · 215/75R16

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1975: 10
Generation: I
Other years: 1971
1972
1973
1974
1975
1976
1977
1978
All years (1968–1994)

10 trims sold in 1975

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Mercedes-Benz T2 I

1967–1986 10 trims

T2 L 405 D 2.2 +1 variant 59 hp · OM615 I4 · Diesel 215/75R16 113R / 215/75R16 113R 1 fitment

Same tires and wheels on: L 407 D 2.4

Generation: I · 1967–1986
Power: 59 hp
Engine: OM615 I4, Diesel
Center bore: 161 mm
Bolt pattern: 6x205
Thread: M18 x 1.5

Check price on Amazon · 215/75R16 Check price on Amazon · 215/75R16 Wheels 16x6 ET120 · 6x205 · 161 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
Front215/75R16 113R	Rim 16x6 ET120 ~~6x205~~	64 psi
Rear215/75R16 113R	Rim 16x6 ET-129 ~~6x205~~	64 psi

How to read 113R: 113 is the load index (up to 2,535 lb / 1,150 kg per tire) and R the speed rating (up to 106 mph / 170 km/h). ET120 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

T2 L 407 D 2.4 +7 variants 64 hp · OM616.910 I4 · Diesel 215/75R16 113R 1 fitment

Same tires and wheels on: L 409 2.3, L 508 DG 3.8, L 608 D 3.8, LF 409 G 2.3, LK 408 G 2.3, LK 409 2.3, LKO 508 DG 3.8

Generation: I · 1967–1986
Power: 64 hp
Engine: OM616.910 I4, Diesel
Center bore: 161 mm
Bolt pattern: 6x205
Thread: M18 x 1.5

Check price on Amazon · 215/75R16 Wheels 16x6 ET-129 · 6x205 · 161 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
215/75R16 113R	Rim 16x6 ET-129 ~~6x205~~	64 psi

How to read 113R: 113 is the load index (up to 2,535 lb / 1,150 kg per tire) and R the speed rating (up to 106 mph / 170 km/h). ET-129 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.