2003 Mitsubishi Challenger tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 6x139.7 on every 2003 trim.

Tires for the 2003 Mitsubishi Challenger

Sizes most trims come with first. Open your trim below for its exact size.

235/80R15 Best-rated standard on 1 trim

Check price on Amazon · 235/80R15
265/70R15 Best-rated optional on 1 trim

Check price on Amazon · 265/70R15
265/70R16 Best-rated optional on 1 trim

Check price on Amazon · 265/70R16

Also listed: 265/65R17

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2003: 1
Generation: PA.II
Other years: 1999
2000
2001
2002
2003
2004
2005
2006
All years (1996–2015)

1 trim sold in 2003

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Mitsubishi Challenger PA.II

2000–2006 1 trim

Challenger 3.0i 182 hp · 6G72 V6 235/80R15 109S 4 fitments

Generation: PA.II · 2000–2006
Power: 182 hp
Engine: 6G72 V6, Petrol
Center bore: 108.1 mm
Bolt pattern: 6x139.7
Thread: M12 x 1.5

Check price on Amazon · 235/80R15 Wheels 15x6 ET33 · 6x139.7 · 108.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
235/80R15 109S	Rim 15x6 ET33 ~~6x139.7~~	29 psi
265/70R15 112S	Rim 15x7 ET10 ~~6x139.7~~	29 psi
265/70R16 112H	Rim 16x7 ET10 ~~6x139.7~~	29 psi
265/65R17 110H	Rim 17x7.5 ET0 ~~6x139.7~~	29 psi

How to read 109S: 109 is the load index (up to 2,271 lb / 1,030 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET33 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.