2020 Mitsubishi Delica D:2 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 2020 trim.

Tires for the 2020 Mitsubishi Delica D:2

Sizes most trims come with first. Open your trim below for its exact size.

165/65R15 Best-rated standard on 3 trims

Check price on Amazon · 165/65R15
185/60R15 Best-rated optional on 3 trims

Check price on Amazon · 185/60R15
185/55R16 Best-rated optional on 3 trims

Check price on Amazon · 185/55R16

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2020: 3
Generation: MB
Other years: 2016
2017
2018
2019
2020
2021
2022
2023
All years (2011–2026)

3 trims sold in 2020

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Mitsubishi Delica D:2 MB

2015–2020 3 trims

Delica D:2 1.2i (5AA-MB37S) +2 variants 90 hp · 1.2L K12C I4 · Hybrid 165/65R15 81S 3 fitments

Same tires and wheels on: 1.2i (DAA-MB36S), 1.2i (DAA-MB46S)

Generation: MB Facelift · 2015–2020
Power: 90 hp
Engine: 1.2L K12C I4, Hybrid
Center bore: 56.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.5

Check price on Amazon · 165/65R15 Wheels 15x5 ET45 · 4x100 · 56.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
165/65R15 81S	Rim 15x5 ET45 ~~4x100~~	36 psi
185/60R15 84S	Rim 15x5.5 ET45 ~~4x100~~	36 psi
185/55R16 83H	Rim 16x6 ET38 ~~4x100~~	36 psi

How to read 81S: 81 is the load index (up to 1,019 lb / 462 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.