1995 Mitsubishi Diamante Wagon tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 1995 trim.

Tires for the 1995 Mitsubishi Diamante Wagon

Sizes most trims come with first. Open your trim below for its exact size.

205/65R15 Best-rated standard on 1 trim

Check price on Amazon · 205/65R15
215/60R16 Best-rated optional on 1 trim

Check price on Amazon · 215/60R16
215/55R17 Best-rated optional on 1 trim

Check price on Amazon · 215/55R17

Also listed: 225/50R17

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1995: 1
Generation: K4
Other years: 1993
1994
1995
1996
1997
1998
1999
2000
All years (1993–2001)

1 trim sold in 1995

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Mitsubishi Diamante Wagon K4

1993–1996 1 trim

Diamante Wagon 3.0i (E-K45) 162 hp · 6G72 V6 205/65R15 93H 4 fitments

Generation: K4 · 1993–1996
Power: 162 hp
Engine: 6G72 V6, Petrol
Center bore: 67.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 205/65R15 Wheels 15x6 ET46 · 5x114.3 · 67.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
205/65R15 93H	Rim 15x6 ET46 ~~5x114.3~~	32 psi
215/60R16 95H	Rim 16x6 ET46 ~~5x114.3~~	32 psi
215/55R17 93H	Rim 17x6.5 ET48 ~~5x114.3~~	32 psi
225/50R17 93V	Rim 17x7 ET44 ~~5x114.3~~	35 psi

How to read 93H: 93 is the load index (up to 1,433 lb / 650 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET46 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.