2005 Mitsubishi Diamante tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2005 trim.

Tires for the 2005 Mitsubishi Diamante

Sizes most trims come with first. Open your trim below for its exact size.

205/65R15 Best-rated standard on 1 trim

Check price on Amazon · 205/65R15
215/60R16 Best-rated optional on 1 trim

Check price on Amazon · 215/60R16
215/55R17 Best-rated optional on 1 trim

Check price on Amazon · 215/55R17

Also listed: 225/50R17

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2005: 1
Generation: F3/F4
Other years: 1998
1999
2000
2001
2002
2003
2004
2005
All years (1990–2005)

1 trim sold in 2005

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Mitsubishi Diamante F3/F4

1995–2005 1 trim

Diamante 2.5i (ABA-F34A) 168 hp · 6A13 V6 205/65R15 94S 4 fitments

Generation: F3/F4 · 1995–2005
Power: 168 hp
Engine: 6A13 V6, Petrol
Center bore: 67.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 205/65R15 Wheels 15x6 ET46 · 5x114.3 · 67.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
205/65R15 94S	Rim 15x6 ET46 5x114.3	32 psi
215/60R16 95H	Rim 16x6 ET46 5x114.3	32 psi
215/55R17 93H	Rim 17x6.5 ET48 5x114.3	32 psi
225/50R17 93V	Rim 17x7 ET44 5x114.3	35 psi

How to read 94S: 94 is the load index (up to 1,477 lb / 670 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET46 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.