2011 Mitsubishi i tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 2011 trim.

Tires for the 2011 Mitsubishi i

Sizes most trims come with first. Open your trim below for its exact size.

145/65R15 front + 175/55R15 rear Best-rated standard on 2 trims

Check price on Amazon · 145/65R15 front Check price on Amazon · 175/55R15 rear

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2011: 2
Generation: HA
Other years: 2006
2007
2008
2009
2010
2011
2012
2013
All years (2005–2013)

2 trims sold in 2011

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Mitsubishi i HA

2005–2013 2 trims

i 660i (CBA-HA1W) +1 variant 51 hp · 3B20 I3 145/65R15 72T / 175/55R15 77V 1 fitment

Same tires and wheels on: 660T (CBA-HA1W)

Generation: HA · 2005–2013
Power: 51 hp
Engine: 3B20 I3, Petrol
Center bore: 56.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.5

Check price on Amazon · 145/65R15 Check price on Amazon · 175/55R15 Wheels 15x4 ET35 · 4x100 · 56.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
Front145/65R15 72T	Rim 15x4 ET35 ~~4x100~~	35 psi
Rear175/55R15 77V	Rim 15x5 ET35 ~~4x100~~	35 psi

How to read 72T: 72 is the load index (up to 783 lb / 355 kg per tire) and T the speed rating (up to 118 mph / 190 km/h). ET35 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.