2002 Mitsubishi L200 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 6x139.7 on every 2002 trim.

Tires for the 2002 Mitsubishi L200

Sizes most trims come with first. Open your trim below for its exact size.

  1. 195xR15 standard on 2 trims
  2. 31x10.50R15 standard on 1 trim
  3. 255/70R15 Best-rated optional on 3 trims

Also listed: 235/75R15 235/70R16 255/65R16 255/70R16 265/70R16

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2002
3
Generation
K6T-K7T

3 trims sold in 2002

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Mitsubishi L200 K6T-K7T

1996–2005 3 trims
L200 2.0i 99 hp · 4G63 I4 195x R15 5 fitments
Generation
K6T-K7T · 1996–2005
Power
99 hp
Engine
4G63 I4, Petrol
Center bore
108.1 mm
Bolt pattern
6x139.7
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
195x R15Rim 15x6 ET22 6x139.729 psi
235/75SR15Rim 15x6.5 ET15 6x139.729 psi
255/70SR15Rim 15x7 ET5 6x139.729 psi
235/70SR16Rim 16x7 ET5 6x139.729 psi
255/65SR16Rim 16x7.5 ET0 6x139.732 psi
L200 2.4i 130 hp · 2.4L 4G64 I4 195x R15 5 fitments
Generation
K6T-K7T · 1996–2005
Power
130 hp
Engine
2.4L 4G64 I4, Petrol
Center bore
108.1 mm
Bolt pattern
6x139.7
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
195x R15Rim 15x6 ET22 6x139.729 psi
235/75SR15Rim 15x6.5 ET13 6x139.729 psi
255/70SR15Rim 15x7 ET5 6x139.729 psi
235/70SR16Rim 16x7 ET5 6x139.729 psi
255/65SR16Rim 16x7.5 ET0 6x139.732 psi
L200 2.5TD 98 hp · 2.5L 4D56 I4 · Diesel 31x10.50 R15 4 fitments
Generation
K6T-K7T · 1996–2005
Power
98 hp
Engine
2.5L 4D56 I4, Diesel
Center bore
108.1 mm
Bolt pattern
6x139.7
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
31x10.50 R15Rim 15x7 ET5 6x139.726 psi
255/70SR15Rim 15x7 ET5 6x139.729 psi
255/70SR16Rim 16x7 ET5 6x139.729 psi
265/70SR16Rim 16x7.5 ET0 6x139.729 psi
What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 2002
3
Generation
K6T-K7T
Other years
All years (1986–2026)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator