2001 Mitsubishi Lancer Cedia Wagon tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 2001 trim.

Tires for the 2001 Mitsubishi Lancer Cedia Wagon

Sizes most trims come with first. Open your trim below for its exact size.

185/65R14 Best-rated standard on 2 trims

Check price on Amazon · 185/65R14
205/50R16 Best-rated optional on 2 trims

Check price on Amazon · 205/50R16
195/55R15 Best-rated optional on 1 trim

Check price on Amazon · 195/55R15

Also listed: 195/55R16

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2001: 2
Generation: CSW
Other years: 2000
2001
2002
2003
All years (2000–2003)

2 trims sold in 2001

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Mitsubishi Lancer Cedia Wagon CSW

2000–2003 2 trims

Lancer Cedia Wagon 1.8i (GH-CS5W) 129 hp · 4G93 I4 185/65R14 86H 3 fitments

Generation: CSW · 2000–2003
Power: 129 hp
Engine: 4G93 I4, Petrol
Center bore: 56.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.5

Check price on Amazon · 185/65R14 Wheels 14x5.5 ET46 · 4x100 · 56.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
185/65R14 86H	Rim 14x5.5 ET46 ~~4x100~~	30 psi
195/55R15 86H	Rim 15x6 ET46 ~~4x100~~	30 psi
205/50R16 86V	Rim 16x6.5 ET46 ~~4x100~~	33 psi

How to read 86H: 86 is the load index (up to 1,168 lb / 530 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET46 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

Lancer Cedia Wagon 1.8i (TA-CS5W) 129 hp · 4G93 I4 185/65R14 86H 3 fitments

Generation: CSW · 2000–2003
Power: 129 hp
Engine: 4G93 I4, Petrol
Center bore: 56.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.5

Check price on Amazon · 185/65R14 Wheels 14x5.5 ET46 · 4x100 · 56.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
185/65R14 86H	Rim 14x5.5 ET46 ~~4x100~~	30 psi
195/55R16 86H	Rim 16x6 ET46 ~~4x100~~	30 psi
205/50R16 86V	Rim 16x6.5 ET46 ~~4x100~~	33 psi

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.