2004 Mitsubishi Lancer Wagon tire and wheel sizes, bolt pattern and tire pressure

Bolt patterns 4x114.3 or 5x114.3, depending on the market version.

Tires for the 2004 Mitsubishi Lancer Wagon

Sizes most trims come with first. Open your trim below for its exact size.

195/55R15 Best-rated standard on 2 trims

Check price on Amazon · 195/55R15
195/50R16 Best-rated optional on 2 trims

Check price on Amazon · 195/50R16
205/50R16 Best-rated optional on 2 trims

Check price on Amazon · 205/50R16

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2004: 2
Generation: CSW
Other years: 2003
2004
2005
2006
2007
All years (2003–2007)

2 trims sold in 2004

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Mitsubishi Lancer Wagon CSW

2003–2007 2 trims

Lancer Wagon 1.8i (LA-CS5W) 113 hp · 4G93 I4 195/55R15 88H 3 fitments

Generation: CSW · 2003–2007
Power: 113 hp
Engine: 4G93 I4, Petrol
Center bore: 67.1 mm
Bolt pattern: 4x114.3
Thread: M12 x 1.5

Check price on Amazon · 195/55R15 Wheels 15x6 ET46 · 4x114.3 · 67.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
195/55R15 88H	Rim 15x6 ET46 4x114.3	30 psi
195/50R16 86H	Rim 16x6 ET46 4x114.3	33 psi
205/50R16 88H	Rim 16x6.5 ET46 4x114.3	33 psi

How to read 88H: 88 is the load index (up to 1,235 lb / 560 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET46 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Lancer Wagon 1.8T (TA-CS5W) 162 hp · 4G93 I4 195/55R15 88H 3 fitments

Generation: CSW · 2003–2007
Power: 162 hp
Engine: 4G93 I4, Petrol
Center bore: 67.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 195/55R15 Wheels 15x6 ET46 · 5x114.3 · 67.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
195/55R15 88H	Rim 15x6 ET46 5x114.3	30 psi
195/50R16 86V	Rim 16x6 ET46 5x114.3	33 psi
205/50R16 88V	Rim 16x6.5 ET46 5x114.3	33 psi

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.