1999 Mitsubishi Minica tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 1999 trim.

Tires for the 1999 Mitsubishi Minica

Sizes most trims come with first. Open your trim below for its exact size.

  1. 135/80R13 Best-rated standard on 2 trims · optional on 2
  2. 145/80R12 Best-rated standard on 2 trims
  3. 155/70R13 Best-rated optional on 4 trims

Also listed: 155/65R13

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1999
4
Generation
H4

4 trims sold in 1999

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Mitsubishi Minica H4

1998–2011 4 trims
Minica 660 (GD-H42V) 50 hp · 3G83 I3 145/80R12 3 fitments
Generation
H4 · 1998–2011
Power
50 hp
Engine
3G83 I3, Petrol
Center bore
56.1 mm
Bolt pattern
4x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
145/80R12Rim 12x4 ET46 4x10026 psi
135/80R13Rim 13x4 ET46 4x10026 psi
155/70R13 73SRim 13x4 ET46 4x10029 psi
Minica 660 (GD-H47V) 50 hp · 3G83 I3 145/80R12 3 fitments
Generation
H4 · 1998–2011
Power
50 hp
Engine
3G83 I3, Petrol
Center bore
56.1 mm
Bolt pattern
4x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
145/80R12Rim 12x4 ET46 4x10026 psi
135/80R13Rim 13x4 ET46 4x10026 psi
155/70R13 75SRim 13x4 ET46 4x10029 psi
Minica 660 (GF-H42A) 50 hp · 3G83 I3 135/80R13 3 fitments
Generation
H4 · 1998–2011
Power
50 hp
Engine
3G83 I3, Petrol
Center bore
56.1 mm
Bolt pattern
4x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
135/80R13Rim 13x4 ET46 4x10026 psi
155/70R13 75SRim 13x4 ET46 4x10029 psi
155/65R13 73SRim 13x4 ET46 4x10029 psi
Minica 660 (GF-H47A) 50 hp · 3G83 I3 135/80R13 3 fitments
Generation
H4 · 1998–2011
Power
50 hp
Engine
3G83 I3, Petrol
Center bore
56.1 mm
Bolt pattern
4x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
135/80R13Rim 13x4 ET46 4x10026 psi
155/65R13 73SRim 13x4 ET46 4x10029 psi
155/70R13 75SRim 13x4 ET46 4x10029 psi
What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 1999
4
Generation
H4
Other years
All years (1989–2011)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator