1999 Mitsubishi Proudia tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 1999 trim.

Tires for the 1999 Mitsubishi Proudia

Sizes most trims come with first. Open your trim below for its exact size.

225/60R16 Best-rated standard on 2 trims

Check price on Amazon · 225/60R16
225/55R17 Best-rated optional on 1 trim

Check price on Amazon · 225/55R17
245/50R17 Best-rated optional on 1 trim

Check price on Amazon · 245/50R17

Also listed: 225/50R18 245/45R18

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1999: 2
Generation: S3
Other years: 1999
2000
2001
2012
2013
2014
2015
2016
All years (1999–2017)

2 trims sold in 1999

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Mitsubishi Proudia S3

1999–2001 2 trims

Proudia 3.5i (GH-S32A) 237 hp · 6G74 V6 225/60R16 98H 3 fitments

Generation: S3 · 1999–2001
Power: 237 hp
Engine: 6G74 V6, Petrol
Center bore: 67.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 225/60R16 Wheels 16x6.5 ET46 · 5x114.3 · 67.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
225/60R16 98H	Rim 16x6.5 ET46 5x114.3	32 psi
225/55R17 97H	Rim 17x7 ET46 5x114.3	32 psi
225/50R18 97V	Rim 18x7.5 ET46 5x114.3	35 psi

How to read 98H: 98 is the load index (up to 1,653 lb / 750 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET46 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Proudia 5.5i (GH-S33A) 276 hp · 8A80 V8 225/60R16 98H 3 fitments

Generation: S3 · 1999–2001
Power: 276 hp
Engine: 8A80 V8, Petrol
Center bore: 67.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 225/60R16 Wheels 16x6.5 ET46 · 5x114.3 · 67.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
225/60R16 98H	Rim 16x6.5 ET46 5x114.3	32 psi
245/50R17 97V	Rim 17x7.5 ET46 5x114.3	35 psi
245/45R18 97W	Rim 18x8 ET38 5x114.3	35 psi

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.