1987 Mitsubishi Starion tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x114.3 on every 1987 trim.

Tires for the 1987 Mitsubishi Starion

Sizes most trims come with first. Open your trim below for its exact size.

205/55R16 front + 225/50R16 rear Best-rated standard on 1 trim

Check price on Amazon · 205/55R16 front Check price on Amazon · 225/50R16 rear
215/60R15 Best-rated optional on 1 trim

Check price on Amazon · 215/60R15

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1987: 1
Generation: A1
Other years: 1985
1986
1987
1988
1989
1990
All years (1985–1990)

1 trim sold in 1987

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Mitsubishi Starion A1

1982–1990 1 trim

Starion 2.0i (E-A183A) 173 hp · G63B I4 205/55R16 88V / 225/50R16 92V 2 fitments

Generation: A1 · 1982–1990
Power: 173 hp
Engine: G63B I4, Petrol
Center bore: 67.1 mm
Bolt pattern: 4x114.3
Thread: M12 x 1.5

Check price on Amazon · 205/55R16 Check price on Amazon · 225/50R16 Wheels 16x6.5 ET18 · 4x114.3 · 67.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
Front205/55R16 88V	Rim 16x6.5 ET18 4x114.3	30 psi
Rear225/50R16 92V	Rim 16x7.5 ET0 4x114.3	30 psi
215/60R15 89V	Rim 15x6.5 ET18 4x114.3	30 psi

How to read 88V: 88 is the load index (up to 1,235 lb / 560 kg per tire) and V the speed rating (up to 149 mph / 240 km/h). ET18 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.