1996 Nissan March tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 1996 trim.

Tires for the 1996 Nissan March

Sizes most trims come with first. Open your trim below for its exact size.

155/70R13 Best-rated standard on 1 trim · optional on 1

Check price on Amazon · 155/70R13
145xR12 standard on 1 trim

Check price on Amazon · 145xR12
175/60R13 Best-rated optional on 1 trim

Check price on Amazon · 175/60R13

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1996: 2
Generation: II (K11)
Other years: 1992
1993
1994
1995
1996
1997
1998
1999
All years (1982–2026)

2 trims sold in 1996

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Nissan March II (K11)

1992–2002 2 trims

March 1.0 (K11) 58 hp · I4 145x R12 2 fitments

Generation: K11 · 1992–2002
Power: 58 hp
Engine: I4, Petrol
Center bore: 59.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.25

Check price on Amazon · 145xR12 Wheels 12x4 ET45 · 4x100 · 59.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
145x R12	Rim 12x4 ET45 4x100	–
155/70R13 75S	Rim 13x5 ET45 4x100	–

March 1.3 (HK11) 78 hp · I4 155/70R13 75S 2 fitments

Generation: K11 · 1992–2002
Power: 78 hp
Engine: I4, Petrol
Center bore: 59.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.25

Check price on Amazon · 155/70R13 Wheels 13x5 ET45 · 4x100 · 59.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
155/70R13 75S	Rim 13x5 ET45 4x100	–
175/60R13 76H	Rim 13x5 ET45 4x100	–

How to read 75S: 75 is the load index (up to 853 lb / 387 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.